|
Product Details:
|
| Fiber Type: | OM2, G652D | Jacket Material And Fireproofing Grade: | LSZH |
|---|---|---|---|
| Fiber Count: | Duplex | Polishing: | UPC |
| Jacket Color: | Orange, Yellow | Connector Style: | LC/UPC-LC/UPC |
| Fiber Glass Brand: | YOFC Or Corning | Ferrule Material: | 1.5mm Ceramic |
| High Light: | G652D Fiber Optic Patch Cable,LSZH Fiber Optic Patch Cable,1.5mm Ceramic Duplex Patch Cord |
||
Mode conditioners are built in the form of a simple duplex patch cable, so they can easily be installed in a system without the need for additional components or hardware. Their length can range from one meter and up to support virtually any network topography.
The need for this patch cord is due to the single-mode launch nature of the -LX (1300nm) transceiver modules used for Gigabit Ethernet. These modules have to operate for both single-mode and multimode fibers. Launching a single-mode laser into the center of a multimode fiber can cause multiple signals to be generated that confuse the receiver at the other end of the fiber. These multiple signals, caused by Differential Mode Delay (DMD) effects, severely limit the cable distance lengths for operating Gigabit Ethernet. A mode conditioning patch cord eliminates these multiple signals by allowing the single-mode launch to be offset away from the center of a multimode fiber. This offset point creates a launch that is similar to typical multimode LED launches.
|
Items
|
Single mode
|
Multimode
|
||||||
|
PC
|
UPC
|
APC
|
62.5/125
|
50/125
|
50/125 10G
|
|||
|
Insertion Loss
|
<0.3dB
|
<0.2dB
|
||||||
|
Return Loss
|
≥45dB
|
≥50dB
|
≥60dB
|
≥35dB
|
||||
|
Durability
|
<0.1dB typical change,
500 matings |
|||||||
|
Operating Temperature
|
-40 to +75
|
-40 to +75
|
||||||
|
Ferrule Hole Sizes
|
125.0+1/-0um, Conentricity:≤1um
|
125um,Conectricity:1≤3um
|
||||||
|
125.3+1/-0um, Conentricity:≤1um
|
127um,Conectricity:1≤3um
|
|||||||
|
125.5+1/-0um, Conentricity:≤1um
|
128um,Conectricity:1≤3um
|
|||||||
|
126.0+1/-0um, Conentricity:≤1um
|
||||||||
- Usually used in pairs, mode conditioning cables usually require a MC cable at each end to connect the equipment to the cable plant. The only reason to order an odd number of mode conditioning cables is to have a spare on hand.
- If your Gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (single-mode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.
- High quality ferrule
- Various cable diameters available:Φ0.9, Φ2.0, Φ3.0mm
- PC(SPC/UPC), APC polishing available
- Comply with ICE standards,
- RoHS compliant
- Telecommunication
- Computer networks
- CATV networks
- Active device termination
- Instrumentation
Ordering information
1) Connector type: FC, SC, LC, ST, LSH(E2000), MU, MTRJ
2) Ferrule End-face: PC, UPC, APC
3) Gender: male, female
4) Core Type: Single-mode (SM: 9/125um), Multimode (MM: 50/125um or 62.5/125um)
5) Cable Quantity: simplex, duplex
6) Cable Diameter: φ3.0mm,φ2.0mm, φ0.9mm
7) Cable Length: 1, 2, 3 meter or customized
8) Cable type: PVC, LSZH, OFNR, OFNP
Contact Person: Nicole Zhong
Tel: +86-13243787519
